Bordo 1-3/16" HSS Reduced Shank Drill The Bordo 1-3/16" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Made from high-speed steel (HSS) and finished in blue to promote lubricant...

The Bordo 33/64" Reduced Shank Drill delivers accurate, large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote lubricant retention, it helps reduce friction...

Bordo 35/64" HSS Reduced Shank Drill The Bordo 35/64" Reduced Shank Drill combines a large cutting diameter with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to...

Bordo 39/64" HSS Reduced Shank Drill The Bordo 39/64" Reduced Shank Drill pairs a large cutting diameter with a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to aid cutting-fluid retention,...

Bordo 41/64" HSS Reduced Shank Drill The Bordo 41/64" Reduced Shank Drill combines a large cutting diameter with a convenient 1/2" shank, allowing use in standard drill chucks without a special holder. Manufactured from high-speed steel (HSS) with a durable blue finish, it offers...

Bordo 43/64" HSS Reduced Shank Drill The Bordo 43/64" Reduced Shank Drill combines a large cutting diameter with a convenient 1/2" shank, allowing use in standard drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid retention,...

Bordo 45/64" HSS Reduced Shank Drill The Bordo 45/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid...

Bordo 49/64" HSS Reduced Shank Drill The Bordo 49/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Manufactured from high-speed steel (HSS) with a durable blue finish, it promotes...

Bordo 53/64" HSS Reduced Shank Drill The Bordo 53/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid...

Bordo 55/64" HSS Reduced Shank Drill The Bordo 55/64" Reduced Shank Drill pairs a large cutting diameter with a standard 1/2" shank so it fits common drill chucks without special adapters. Made from high-speed steel (HSS) with a blue finish that helps retain cutting...

Bordo 59/64" HSS Reduced Shank Drill The Bordo 59/64" Reduced Shank Drill offers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Made from high-speed steel (HSS) with a blue finish that helps retain...

This Bordo reduced shank drill features a 118° notched point with a 30° helix. The notched point is a variation of the standard chisel point, designed to provide faster starting, reduced drill wander, and improved accuracy. A 118° point angle is ideal for materials...

Hepyc 1" HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 1" HSS Reduced Shank Drill is engineered from high-speed steel and manufactured to DIN 338 standards for durability, precision, and reliability. Its blue oxide finish reduces friction, improves lubrication retention, and enhances...

HEPYC specialises in the manufacturing of Taps, Dies, Drills, End Mills, Reamers, Countersinks and Custom Tools. HEPYC offers a comprehensive range of industrial hardware, perfect for all your drilling, milling, and threading needs. HEPYC 1-1/16" HSS Reduced Shank Drill Specifications : 1-1/16" Cutting Diameter...

Hepyc 1-1/8" HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 1-1/8" HSS Reduced Shank Drill is precision-manufactured from high-speed steel and built to DIN 338 standards for strength, accuracy, and reliability. The blue oxide finish reduces friction, retains lubrication, and improves wear...

Hepyc 13/16" HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 13/16" HSS Reduced Shank Drill is designed for high performance and durability in precision drilling applications. Manufactured from premium high-speed steel and finished with a blue oxide coating, it minimizes friction, improves...

Hepyc 13.0mm HSS-Co Reduced Shank Drill – DIN 338 MR The Hepyc 13.0mm HSS-Co Reduced Shank Drill is built for precise, repeatable drilling of larger diameters using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel provides superior hot hardness and wear resistance, while the 135°...

Hepyc 13.5mm HSS Reduced Shank Drill Bit – DIN 338, Blue Finish, 118° Point The Hepyc 13.5mm HSS Reduced Shank Drill is designed for accurate and efficient drilling where a smaller shank size is required to fit standard drill chucks. Manufactured to DIN 338...

Hepyc 13.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 13.5mm HSS-Co Reduced Shank Drill is designed for precise, repeatable drilling of larger diameters using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel substrate delivers superior hot hardness and wear resistance,...

Hepyc 14.5mm HSS Reduced Shank Drill Bit – DIN 338, Blue Finish, 118° Point The Hepyc 14.5mm HSS Reduced Shank Drill is engineered for precision drilling in a wide range of materials. With a 10mm reduced shank, it fits standard drill chucks, allowing larger...

Hepyc 15mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 15mm HSS Reduced Shank Drill is manufactured from high-speed steel and built to DIN 338 standards, ensuring precision and durability in a wide range of drilling applications. Its blue oxide finish reduces...

Hepyc 15.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 15.0mm HSS-Co Reduced Shank Drill enables large-diameter drilling using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel provides excellent hot hardness and wear resistance, while the 135° split point self-centers to...

Hepyc 15.5mm HSS Reduced Shank Drill DIN 338 The Hepyc 15.5mm HSS Reduced Shank Drill is built to DIN 338 standards, ensuring precision, reliability, and long service life. Made from high-speed steel and finished with a blue oxide coating, it offers reduced friction, better...

Hepyc 15.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 15.5mm HSS-Co Reduced Shank Drill enables larger-diameter drilling with a standard 10 mm chuck. Cobalt-alloyed HSS delivers superior hot hardness and wear resistance, while the 135° split point improves centering and reduces...

Hepyc 16mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 16mm HSS Reduced Shank Drill is designed for precision, durability, and reliable performance across a wide range of drilling applications. Manufactured from high-speed steel and finished with a blue oxide coating, this...

Hepyc 16.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 16.0mm HSS-Co Reduced Shank Drill supports large-diameter drilling with a standard 12 mm chuck. Cobalt-alloyed HSS provides wear resistance and hot hardness, and the 135° split point improves self-centering to reduce walking....

Hepyc 16.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 16.5mm HSS-Co Reduced Shank Drill pairs a 12 mm shank with cobalt-alloyed HSS for durability and heat resistance. A 135° split point provides accurate, low-thrust starts and reduced walking. Conforming to DIN...

Hepyc 17mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 17mm HSS Reduced Shank Drill is precision-engineered to DIN 338 standards, delivering accuracy, durability, and long service life. Made from high-speed steel with a blue oxide finish, it reduces friction, retains lubrication...

Hepyc 17.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 17.0mm HSS-Co Reduced Shank Drill uses a 12 mm shank to machine larger diameters on standard equipment. Cobalt HSS resists heat and wear, and the 135° split point improves centering for accurate...

Hepyc 17.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 17.5mm HSS-Co Reduced Shank Drill combines a 12 mm shank with cobalt HSS for durability and heat resistance. A 135° split point ensures precise starts and reduced walking. Made to DIN 338 MR...